Flexible Tape Feeder

L-014-0442D:
Tape Magazine TMD FLEX
Description:

   Cost effective flexibility is provided by the TM-Flex Magazine which allows a non-permanent configuration of a wide range of feeder sizes in a single magazine. This allows versatility while reducing overall magazine inventory. The feeders are easy to remove in order to reconfigure the magazine for another job, Also, tapes are loaded and unloaded on these units in the same manner as on the fixed magazines.
   FLEX tape feeder units available are suitable for 8, 12, 16, 24, 32, 44 and 56 mm tapes. The maximum number of feeder units one can fit in a FLEX Magazine depends on the module size of each feeder unit, there is room for up to 17 modules in one magazine. The FLEX feeder units are sold separately.

Requirements: FLEX feeder unit
Machine type: TP(-1 TP9-2 TP9-3 TP9-4 TP11 TP12 TP18 MY9 MY12 MY15 MY19

L-014-0416:
Flex Feeder 1 x 8 mm
Description: Module size = 2
Requirements: Tape Magazine TMC FLEX (L-014-0442D).

L-014-0410:
Flex Feeder 2 x 8 mm
Description: Module size = 3
Requirements: Tape Magazine TMC FLEX (L-014-0442D).

L-014-0406:
Flex Feeder 4 x 8 mm
Description: Module size = 5
Requirements: Tape Magazine TMC FLEX (L-014-0442D).

L-014-0403:
Flex Feeder 1 x12 mm
Description: Module size = 4
Requirements: Tape Magazine TMC FLEX (L-014-0442D).

L-014-0417:
Flex Feeder 2 x 12 mm
Description: Module size = 4
Requirements: Tape Magazine TMC FLEX (L-014-0442D).

L-014-0912:
Flex Feeder 1 x 16 mm
Description: Module size = 3
Requirements: Tape Magazine TMC FLEX (L-014-0442D).

L-014-0418:
Flex Feeder 2 x 16 mm
Description: Module size = 5
Requirements: Tape Magazine TMC FLEX (L-014-0442D)

L-014-0415:
Flex Feeder 12 x 16 mm
Description: Module size = 3
Requirements: Tape Magazine TMC FLEX (L-014-0442D).

L-014-0419:
Flex Feeder 1 x 24 mm
Description: Module size = 3
Requirements: Tape Magazine TMC FLEX (L-014-0442D)

L-014-0421:
Flex Feeder 1 x 32 mm
Description:
  -Module size = 4
  -Max. tape depth (with handle conversion) = 10 mm (0.39”).
  -Max. tape depth (without handle conversion) = 7.5 mm (0.30”).
  -For FLEX Magazines with the tubular front handle, a minor conversion of the handle is required in order to achieve the maximum tape depth of 10 mm.
Requirements: Tape Magazine TMC FLEX (L-014-0442D).
  - Please also state on the order form if you require the FLEX Conversion Kit (L-014-0749).

L-014-0422:
Flex Feeder 1 x 44 mm
Description:
  -Module size = 5
  -Max. tape depth (with handle conversion) = 10 mm (0.39”).
  -Max. tape depth (without handle conversion) = 7.5 mm (0.30”).
  -For FLEX Magazines with the tubular front handle, a minor conversion of the handle is required in order to achieve the maximum tape depth of 10mm.

Requirements: Tape Magazine TMC FLEX (L-014-0442D).
  -Please also state on the order form if you require the FLEX Conversion Kit (L-014-0749).

L-014-0423:
Flex Feeder 1 x 56 mm
Description:
  -Module size = 7
  -Max. tape depth (with handle conversion) = 10 mm (0.39”).
  -Max. tape depth (without handle conversion) = 7.5 mm (0.30”).
  -For FLEX Magazines with the tubular front handle, a minor conversion of the handle is required in order to achieve the maximum tape depth of 10mm.
Requirements: Tape Magazine TMC FLEX (L-014-0442D.
  - Please also state on the order form if you require the FLEX Conversion Kit (L-014-0749).