XStation GR-X7005 ATE Test Equipment
System Overview:
The XStation Combo 7000-series of high-speed, in-line, automated x-ray inspection systems are designed for non-destructive analysis of solder joint integrity and printed circuit board (PCB) component placement. XStation Combo-7000 systems feature high-resolution (1024 X 1024) image sampling and SMEMA-compatible conveyors for in-line processing. Although the XStation Combo-7000 systems are designed to be used 100% high-speed, automated and in-line, any system can also be used in an off-line mode or semi-automated mode.
System Type: XStation GR-X7005
(Combination Transmission and Cross Section High Resolution AXI)
System Serial No: X7005-1506
System Software: AXI 6.4SP1
The XStation includes the following items:
X-Ray Imagining Subsystem
Micro-focus X-Ray tube
Digital X-Ray Detector
Fixed 0.5” x 0.5” Field-of-view
Material Handling System
High Speed X-Y table
Maximum single Board Size: 18” x 22” (with staging)
Maximum Inspectable Size: 15.5” x 17.7” for MACK GR-X 7005
Computer Subsystem
Dual P3 Processor from Dell which supports standard inspection of 50,000 solder joints / panel
15” Color LCD Monitor
1 (27GB) and 1 (73GB) Disk Drive
System Software
GRX—X Run time Operating Software (AXI 6.4 SP1)
Inspection Enclosure
Shield X-Ray enclosure that complies with FDA regulations for radiation and safety requirements
Integrated Shuttle System
Allows in-line, simultaneous load and unload of PCBs
SMEMA 1.2 compatible
Computer & Peripherals
Barcode reader Assembly
Tag Printer
17 rolls of printer paper
Full set of XStation Manuals- Hard Copy version
Off-line Application Development Station
Sun Ultra Series Workstation w/Monitor
Framework Application Software
Sun PCI Card, including Windows NT 4.0
2.5 GB Jazz Drive
Repair Station
Sun Ultra Series Workstation w/Monitor
X-Ver Software module
X-Stat SPC Software module
2.5 GB Jazz Drive
Barcode Reader and Stand
Specifications______________________________GR-X7005___________
Physical Dimensions
Footprint with conveyor 120”(L) x 55”(W) 305cm(L) x 140cm(W)
Service area 120”(L) x 109”(W) 305cm(L) x 277cm(W)
Weight 6500lbs/ 2955kg
Facility requirements: air 100-120 psi compressed
Facility requirements: Power 208 +/- 15% VAC, Single Phase, 20 AMP
Note: Can also be configured for 230 VAC and 480 VAC
Performance
Field-of-view 0.5” / 12.7mm
Max PCB size 22”(L) x 18”(W)
558cm(L) x 457cm(W)
Note: Board handling is length-wise
Min PCB size 2.0”(L) x 2.0”(W)
51mm(L) x 51mm(W)
Note: Board handling is length-wise
Edge clearance 0.15” / 3.8mm
Max board thickness 0.25” / 6.3mm
Min board thickness 0.015” / 0.4mm
Top side clearance 0.8” / 20.3mm
Max. Solder joints with 512MB ram 50,000
Test Speed
Load / Unload Less than 6 seconds
Fiducial recognition time Average 2 seconds
Test rate [total FOV] Up to 1.05in.2 / 6.77 cm2 per second [2D]
Note: Useable FOV can vary by application, estimate test time in 2D mode = (board length) x (board width)/(2D test rate)
Test rate [total FOV]
Up to 1.00in.2 / 6.45 cm2 per second [3D]
Note: Useable FOV can vary by application, estimate
test time in 3D mode = (board length) x (board width)/(3D test rate),
assumes 2 slices operation (top and bottom sides of board)
Surface map time
Not required
For More Information Contact Sales Department:
Phone: 603-880-7355
e-mail: sales@v-ne.com
|
