DEK 265 GSX Screen Printer

Features:
Telecentric Vision System
Automatic Paste Dispensing
Environmental Control of the Print head
Dual-Flo Squeegee System
Programmable Underscreen Cleaning

Options:
Autoflex Programmable Tooling
2D Inspection

Machine Dimensions:
51.7in (1.31m) wide x 55.3in (1.41m) deep
X 57.4in (1.46m) high

Approximate Shipping Weight:
1,760 lbs (800kg)

Pneumatic Requirements:
4-8 bar (60-120 psi)

Electrical Requirements:
110,200,220,230,240 Volt
50.60 Hz approximately 3kW

Screen Frames:
29in (736mm) x 29in (736mm) external dimensions
Easily adjustable to accept most competitors’ frame sizes. Adapters available for other sizes.

Board Handling:
Board Size:
Max. -20.1 x 20 +/- 0.02in (510 x 508 +/- 0.5mm)
Min. -2.8 x 1.5+/- 0.02 in (70 x 38 +/- 0.5mm)
Thickness:
0.016 – 0.25in (0.4-6.0mm) +/- 10%
Underside Component Clearance:
Programmable in the range0.12 – 1 in (3 – 25mm)
Feed Direction:
Selectable pass thru, left-to right or right to left, or single-ended operation

Print Parameters:
Max. Area: 20 in (510mm) x 19.25in (489mm)
Speed: 0.08-5.9 in/sec (2-150 mm/sec)
Pressure: 0-44 lbs. (0-20kg)
Gap: 0-.24in (0-6mm)
Programmable Separation Speed: 0.06-0.79 in/sec (0.1mm-20mm/sec)
Paste Dispenser: Programmable dispense rate and volume. Interchangeable 1 kg (o.5kg optional) cartridge with low paste alarm.
Screen Cleaner: Programmable 0-100 cycles with solvent and vacuum option
Squeegee Type: Double squeegee, single diamond or trailing edge bonded polyurethane, metal or composite ProFlow DirEKt Imaging compatible

Vision Parameter:
Single motorized camera with telecentric look up/down optics

Performance:
Alignment Repeatability: 6 Sigma at 25 microns
Print Accuracy: 3 Sigma at 25 Microns

Control System:
Serial communication to SECS II for parameter and Management Information. SPC data output. Parallel output to printer.

For More Information Contact Sales Department:
Phone: 603-880-7355
e-mail: sales@v-ne.com