Fuji IP- III Placement SMT Machine

High speed, Highly accurate
The IP-III is equipped with many technological breakthroughs that allow the IP-III to perform like no other and handle a wide variety of components.

Features:
Placement Range from 1005 to 74 x 74
Non-Contact Coplanarity Check
Narrow View Camera for Fine Pitch Lead Placement
Placing Pressure can be Controlled by each Program

Equipment Specifications

Machine Dimensions:
125.4in (3185mm) Long x
99.6in (2530mm) Wide x
72.8in (1850mm) High

Approximate Shipping Weight:
8,818 lb. (4,000 kg)
With MTU: 11,244 lb. (5,100 kg)

Pneumatic Requirements:
300N 1/min (5 kg/cm2)

Electrical Requirements:
3-Phase, 200-480 VAC
Avg. consumption 4.5 KW
Capacity 13.2 KVA

Board Dimensions:
Maximum: 18 in. x 14 in. (457 mm x 356 mm)
Minimum: 3.15 in. x 1.97 in. (80 mm x 50 mm)

Placeable Parts:
1005 to 74
Insertion Rate:
Approximately 0.55 sec/shot for small chips
1.25 sec/shot for IC Components
2.5 sec/shot for Tray Components

Placing Accuracy:
+/- 0.000098 in. (+/- 0.025 mm)
Components without Leads: +/- 0.0039 in. (+/- 0.1 mm)

Component Supply:
Tape: Maximum 74 slots
Stick: maximum 36 slots
Tray: Maximum 40 trays

Placing Rate:
0.55 sec/shot for
1.25 sec/shot for IC Parts
2.5 sec/shot for Tray Parts

Options:
Coplanarity Check
Multi-Feeder Unit (MFU)
Multi-Tray Unit (MTU)
Programmable Placing Pressure
Mechanical Chuck (custom)

For More Information Contact Sales Department:
Phone: 603-880-7355
e-mail: sales@v-ne.com