MPM AP-20 Specifications

Be sure and call or e-mail regarding this screen print inventory.

Model AP 20

Print Area: 2” x 2” to 15” x 15” (51 mm x 51 mm to 381 mm x 381 mm)
Board Size: 2” x 2” (51 mm x 51 mm) minimum to 15” x 15” (381 mm x 381 mm) maximum
Frame Size: 29” x 29” (737 mm x 737 mm)

All Models

Stencil:
X, Y adjustment - +/- 0.5” (+/- 12.7 mm)
Theta adjustment - +/- 3º

Services:
115V, 60 Hz, 30 amp (220V, 50 Hz, 20 amp)
Air-80-125 PSI at 2 cfm

Dimensions:
Length: 55” (1408 mm) to 62” (1573 mm)
Width: 39” (991 mm)
Height: 52.25” plus 7” adjustment (1327 mm plus 178 mm adjustment)
Shipping weight: 1500 lbs. (677 kg)

Optional

Vision System:
Viewing Capability: 16” x 17 ½” (406.4 mm x 444.5 mm)
Field of View: 0.375” (9.525 mm) horizontal X 0.300” (7.62 mm) vertical
Maximum Teach Area: 0.070” (1.778 mm) square
  -must have unique shape
  -must appear on stencil
  -0.30” to 0.060” (.762 mm to 1.524 mm)
  -pretinned and hot air leveled

Programmable Squeegee Head:
Maximum Squeegee Travel: 18” (450 mm)
Pressure: 1 to 60 lbs. (.453 to 27.2 kg)
Down Stop: Adjustable in .0005” (6 microns) increments
  -Adjustable angle
  -Floating dual or single squeegee
Squeegee Holder: up to 21” (533.4 mm) maximum squeegee length

Board Handling System:
Board Clearance: 0.5” (12.7 mm) below board protrusion
Board Edge Clearance: Edge used by transport tracks & vacuum chuck 0.188” (4.78 mm)
Transport Tracks: Left to right or right to left feed direction
  - Fixed track front or optional fixed rear track
  - Height from bottom of the board to ground 34” to 40”
  - (864 mm to 1016 mm)
Tooling Pins: 0 to 1” (0 – 25.4 mm) in front or optional rear edge: using conical pins
Snap-Off Distance: Adjustable in 0.001” (.025mm) increments to a maximum of 1” (25.4 mm)